Precision Cylinder / PDI M24

「Precision Cylinder / PDI M24」 PRODUCT CODE:640192

We adapt new technology of 01&05 barrels called "cold hammering" .The inner diameter torelance is 1/100mm.We have never seen as this accuracy torelance of this cylinder. ※ For PDI (or Classic Army)M24.This is not for M24X cause that's outer dia.of cylinder is 22mm.
The welded points We welded the cylinder some points.Actually,our cylinder had a really durability,compared to others.But we add "welded process" to be more tough cylinder. 1:The shaft & End Boss(a pink point) 2:The boss & Body(a red point) 3:To Combine shaft & boss(a red point) These pictures are type of APS-2
4-parallel Pins Around the body,Diameter 3mm,(Please watch the above picture.It's a green point) 4-Parallel Pins is knocked the body to prevent from falling off.

★Sale \ 16,897 We deem to get your agreement for the below policy when you place an order.

【Notes regarding CA M24!】
It has been confirmed that CA (Classic Army) M24 has M4 screws instead of M3 to attach the receiver and trigger box.
Depending on the lot it may not be possible to install it, so be sure to check your CA M24 before purchasing.

Since Classic Army's products undergo design changes frequently, there is a high possibility that the parts we handle might not compatible.

※We are unable to check the lots of CA M24 or if your rifle is compatible.
※Items purchase cannot be returned as they removed out of the package.

Please read the below policy
We deem to get your agreement for the below policy when you place an order.
○We couldn't assure the trouble with your lack of skill.
○It may be required to adjust to fit because our custom parts reduce the clearance of normal parts to lead the best condition.
○Do not use the 3rd party products.Because we design with Normal parts or PDI-products.
　If you ignore our rule & breake up your guns、we couldn’t be responsible.
○It is possible to change the spec or design.